Mechanical Door Repairers
Overview
SaveJob Zone Two: Some Preparation Needed
Experience
Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
Education
These occupations usually require a high school diploma.
Job Training
Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
Examples
These occupations often involve using your knowledge and skills to help others. Examples include orderlies, counter and rental clerks, customer service representatives, security guards, upholsterers, tellers, and dental laboratory technicians.
Install, service, or repair automatic door mechanisms and hydraulic doors. Includes garage door mechanics.
Yearly Salary
| High: | $65K |
| Median: | $43K |
| Low: | $28K |
Demand
Core Tasks
- Wind large springs with upward motion of arm.
- Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers.
- Order replacement springs, sections, or slats.
- Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems.
- Complete required paperwork, such as work orders, according to services performed or required.
- Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
- Repair or replace worn or broken door parts, using hand tools.
- Collect payment upon job completion.
- Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment.
- Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location.
- Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment.
- Set doors into place or stack hardware sections into openings after rail or track installation.
- Lubricate door closer oil chambers, and pack spindles with leather washers.
- Operate lifts, winches, or chain falls to move heavy curtain doors.
- Remove or disassemble defective automatic mechanical door closers, using hand tools.
- Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines.
- Prepare doors for hardware installation, such as drilling holes to install locks.
- Run low voltage wiring on ceiling surfaces, using insulated staples.
- Cut door stops or angle irons to fit openings.
- Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers.
- Install dock seals, bumpers, or shelters.
- Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
- Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles.
- Bore or cut holes in flooring as required for installation, using hand or power tools.
- Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels.
Technology Skills
Technology
Example
Hot Technology
Tools Used
Tool
Example
Top 10 Knowledge Required
Mechanical
79%
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Customer and Personal Service
77%
Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Building and Construction
75%
Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
Engineering and Technology
62%
Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mathematics
60%
Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
Computers and Electronics
59%
Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
English Language
58%
Knowledge of the structure and content of the English language including the meaning and spelling of words, and rules of composition and grammar.
Design
56%
Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
Administration and Management
55%
Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Public Safety and Security
55%
Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
Top 10 Skills
Critical Thinking
70%
Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.
Quality Control Analysis
65%
Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Active Listening
63%
Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Installation
63%
Installing equipment, machines, wiring, or programs to meet specifications.
Reading Comprehension
63%
Understanding written sentences and paragraphs in work-related documents.
Speaking
63%
Talking to others to convey information effectively.
Active Learning
60%
Understanding the implications of new information for both current and future problem-solving and decision-making.
Complex Problem Solving
60%
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
Coordination
60%
Adjusting actions in relation to others' actions.
Instructing
60%
Teaching others how to do something.
Top 10 Abilities
Arm-Hand Steadiness
78%
The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
Manual Dexterity
78%
The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Near Vision
75%
The ability to see details at close range (within a few feet of the observer).
Problem Sensitivity
73%
The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
Trunk Strength
73%
The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
Extent Flexibility
68%
The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
Finger Dexterity
68%
The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
Static Strength
68%
The ability to exert maximum muscle force to lift, push, pull, or carry objects.
Oral Comprehension
65%
The ability to listen to and understand information and ideas presented through spoken words and sentences.
Control Precision
63%
The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Top 10 Work Activities
Operating Vehicles, Mechanized Devices, or Equipment
84%
Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or watercraft.
Performing General Physical Activities
84%
Performing general physical activities includes doing activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials.
Getting Information
79%
Observing, receiving, and otherwise obtaining information from all relevant sources.
Handling and Moving Objects
77%
Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Inspecting Equipment, Structures, or Materials
76%
Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Identifying Objects, Actions, and Events
74%
Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
Making Decisions and Solving Problems
74%
Analyzing information and evaluating results to choose the best solution and solve problems.
Repairing and Maintaining Mechanical Equipment
72%
Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
Communicating with Supervisors, Peers, or Subordinates
71%
Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Performing for or Working Directly with the Public
70%
Performing for people or dealing directly with the public. This includes serving customers in restaurants and stores, and receiving clients or guests.
Detailed Work Activities
- Drill holes in parts, equipment, or materials.
- Adjust equipment to ensure optimal performance.
- Assemble mechanical components or machine parts.
- Gather information about work conditions or locations.
- Collect payments for goods or services.
- Document operational activities.
- Replace worn, damaged, or defective mechanical parts.
- Repair worn, damaged, or defective mechanical parts.
- Move materials, equipment, or supplies.
- Position equipment using hand tools, power tools, or heavy equipment.
- Disassemble equipment for maintenance or repair.
- Remove parts or components from equipment.
- Install hardware or other interior fixtures.
- Assemble structural components.
- Run wiring to connect equipment.
- Cut materials according to specifications or needs.
- Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
- Move large objects using heavy equipment.
- Order materials, supplies, or equipment.
- Assemble electrical components, subsystems, or systems.
- Connect electrical components or equipment.
- Lubricate equipment to allow proper functioning.
- Install structural foundations.
- Fabricate parts or components.
- Clean equipment, parts, or tools to repair or maintain them in good working order.
- Test mechanical equipment to ensure proper functioning.
Education
Interests
Realistic
99%
Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.
Conventional
55%
Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or human resources.
Investigative
25%
Work involves studying and researching non-living objects, living organisms, disease or other forms of impairment, or human behavior. Investigative occupations are often associated with physical, life, medical, or social sciences, and can be found in the fields of humanities, mathematics/statistics, information technology, or health care service.
Social
22%
Work involves helping, teaching, advising, assisting, or providing service to others. Social occupations are often associated with social, health care, personal service, teaching/education, or religious activities.
Artistic
15%
Work involves creating original visual artwork, performances, written works, food, or music for a variety of media, or applying artistic principles to the design of various objects and materials. Artistic occupations are often associated with visual arts, applied arts and design, performing arts, music, creative writing, media, or culinary art.
Enterprising
15%
Work involves managing, negotiating, marketing, or selling, typically in a business setting, or leading or advising people in political and legal situations. Enterprising occupations are often associated with business initiatives, sales, marketing/advertising, finance, management/administration, professional advising, public speaking, politics, or law.
Work Values
Independence
67%
Occupations that satisfy this work value allow employees to work on their own and make decisions. Corresponding needs are Creativity, Responsibility and Autonomy.
Support
67%
Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
Working Conditions
46%
Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.
Achievement
39%
Occupations that satisfy this work value are results oriented and allow employees to use their strongest abilities, giving them a feeling of accomplishment. Corresponding needs are Ability Utilization and Achievement.
Relationships
39%
Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service.
Recognition
34%
Occupations that satisfy this work value offer advancement, potential for leadership, and are often considered prestigious. Corresponding needs are Advancement, Authority, Recognition and Social Status.